These instructions are forOUR glazeonly - all glazes have different application instructions and these ones are specifically for ours.
If you'd like to make your piece ceramic so that it is food and water safe follow the instructions below. Make sure that you DON'T apply any acrylic paint or our sealer to your piece. Please read all of this info before glazing :)
Leave your piece to dry for 2 days with a bag (like a bin liner) over it to slow the drying time down. Then take it off and dry for additional 2 weeks out of direct sunlight so that it becomes bone dry.
- Reach out to your local potters or pottery clubs to ask if they will fire it for you
- There will be a fee for this service (this will vary between kilns) and it is a two step process: Bisque & Gloss firing. Our clay can be bisque fired to 1000 ℃ and then gloss fired to - cone 06.
1. Shake the jar well - Glazes can be used singularly or mixed for desired colours.
2. Apply one even coat for a translucent finish with your paint brush - make sure you cover all the areas you want to be food safe, and don't apply any glaze to the bottom of your piece. Apply one more coat for an opaque finish (make sure you don't apply too much glaze or it might burn/melt in the kiln). Make sure you let your piece dry in between coats.
**If you only want to design bits of your piece (e.g. paint flowers on it), you'll need to ask the potter who is firing your work to apply a clear glaze to your piece after bisque firing to make the entire piece food and water safe. or if you have bought some of our clear glaze you can apply this before bisque firing.
3. Remove any glaze from the bottom of your piece with a damp sponge so that your piece doesn't stick to the kiln shelf.
4. Take to your local kiln to be bisque and gloss fired. ** If your piece is fully covered with our glaze, there is no need for a clear glaze to be applied after bisque firing.